GR2 Stainless Steel Titanium Alloy Surface quality: high precision, good finish, the surface does not allow the existence of dark and local water marks; No scratches, indentations, pits, cracks, peeling, oxide scale, folding, delamination, metal and non-metal clips, alkali wash traces and other defects. Surface finish: clean, dust-free, better corrosion resistant service life. Physical properties: better elongation and strength properties, no deformation after high temperature, no cracks after flattening and bending.

GR1 Stainless Steel Titanium Alloy Titanium alloy is based on titanium and other elements of the alloy. Titanium has two homogeneous crystals: below 882℃, a dense hexagonal structure of α titanium, above 882℃, a body-centered cubic β titanium.

500 Monel Plate/Sheet It has higher mechanical strength and hardness. It has good thermal corrosion resistance and long - term structural stability. It is mainly used in the manufacture of turbine blades and gas turbine blades with operating temperatures below 750℃ on aeroengines. Used in the manufacture of fasteners and springs on ships; Pump and valve parts on chemical equipment; Scraper blade on papermaking equipment, etc

400 Monel Plate/Sheet alloy is a versatile material, It can be applied in many industrial fields: 1. Seamless transmission pipe and steam pipe in power plant 2. Seawater exchangers and evaporators 3. Sulfuric acid and hydrochloric acid environment 4. Crude oil distillation 5. Pump shafts and propellants for deep seawater use equipment 6. The nuclear industry manufactures equipment for uranium refining and isotope separation 7. Manufactures pumps and valves used in equipment for the production of hydrochloric acid

909 Incoloy Plate/Sheet is a Fe-Ni-Co based precipitation-hardened deformation superalloy, which is used at a temperature below 650℃. The alloy has high strength, high cold and hot fatigue resistance, low expansion coefficient and constant elastic modulus, and good hot working plasticity, cold forming and welding properties. The main products are bar, wire, strip and ring.

825 Incoloy Plate/Sheet.This composite metal is a nickel-based corrosion resistant alloy containing a small amount of metal elements molybdenum and copper. In reducing and oxidizing acids, it has good corrosion resistance, and good resistance to stress corrosion cracking, pitting and crevice corrosion. It has excellent corrosion resistance to sulfuric acid and phosphoric acid. The alloy has good hot and cold working properties, easy to cold forming and welding. The main products of this alloy include bar, pipe, plate, strip, wire and forgings, etc., which are mainly used in chemical, petrochemical, nuclear industry and rare metal refining industries.

800 Incoloy Plate/Sheet alloy Ni-Fe-Cr Fe-Ni base corrosion resistant alloy, this alloy in high temperature water vapor, including steam - air -CO2 gas mixture, has good corrosion resistance, in some high temperature and high pressure water medium, its stress corrosion resistance is significantly better than 18-8 stainless steel and Inconel600; It also has good corrosion resistance in H2+H2S medium, and in alkaline medium containing NaOH, its stress corrosion resistance is better than Inconel600 and other high nickel alloys. The main products of this alloy are bar, pipe, plate, strip, wire and forgings, etc., which are mainly used in nuclear industry, petrochemical industry, chemical industry, food industry and so on.

X-750 Inconel Plate/Sheet alloy is mainly a nickel-based superalloy with γ"[Ni3(Al, Ti, Nb)] phase aging strengthening. It has good corrosion resistance and oxidation resistance under 980℃, high strength under 800℃, and good relaxation resistance under 540℃. At the same time, it has good forming performance and welding performance. The alloy is mainly used in the manufacture of plane springs and coil springs that work below 800℃ and require high strength and slack resistance. It can also be used to manufacture parts such as turbine blades of steam turbines. We can supply plate, strip, bar, forgings, ring parts, wire and pipe.

625 Inconel Plate/Sheet alloy is a solid solution strengthened nickel-based deformation superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile and fatigue properties from low temperature to 980℃, and is resistant to stress corrosion in salt spray atmosphere. Therefore, it can be widely used in the manufacture of aero engine parts, aerospace structural parts and chemical equipment. The alloy is used to manufacture engine casing, guide blade, mounting edge and barrel, fuel main and other parts, has passed the practical application assessment, the maximum operating temperature of 950℃; The alloy has a certain aging hardening phenomenon after long-term use at 550 ~ 700℃, resulting in some decline in the plasticity of the alloy.