2507 NO.1 Stainless Hot Rolled Sheet combines many of the most beneficial properties of ferritic and austenitic steels. Due to the high chromium and molybdenum content of the steel, it has excellent resistance to point corrosion, crevice corrosion and uniform corrosion. The biphasic microstructure ensures that the steel has high stress corrosion rupture resistance and high mechanical strength. Applied to oil and gas industry, etc.

2205 NO.1 Stainless Hot Rolled Sheet has yield strength more than double that of ordinary austenitic stainless steel, allowing weight to be reduced when designing products, it has high strength, good impact toughness and good overall and local stress corrosion resistance. Suitable for pressure vessels, high pressure storage tanks, high pressure pipeline, heat exchanger (chemical processing industry), oil and natural gas pipeline.

444 NO.1 Stainless Hot Rolled Sheet belongs to high alloy ferritic stainless steel, the steel has good pitting corrosion resistance, crevice corrosion, stress corrosion ability, has good resistance to intergranular corrosion and high temperature oxidation performance. Its high thermal conductivity, very suitable for the use of heat exchange, the plasticity of the steel, good toughness, suitable for stretching, rolling and stamping manufacturing.

441 NO.1 Stainless Hot Rolled Sheet has high workability, weldability, corrosion resistance, low carbon content, in addition to the addition of stabilizing element Ti. Generally used as exhaust gum, front tube, CONVERTER, etc., for automobile exhaust system.

439 NO.1 Stainless Hot Rolled Sheet is on the basis of ordinary ferritic materials to reduce the content of carbon, at the same time adding Ti and other stabilizing elements, so that the steel resistance to intergranular corrosion, formability and weldability have been improved. Compared with 304 steel, although the elongation is lower (about 30%), the strength and corrosion resistance are comparable, and the corrosion resistance is better than 200 series materials.

420J2 NO.1 Stainless Hot Rolled Sheet is Martensioned stainless steel for use after quenching and tempering. It has higher strength, hardness and hardenability, but its corrosion resistance and thermal stability below 700℃ is low. Cold working performance and welding performance is not good, after welding should be immediately heat treatment to prevent cracking. It has good machining performance in annealed state.

420J1 NO.1 Stainless Hot Rolled Sheet has certain wear resistance and corrosion resistance, high hardness, suitable for the ordinary requirements of stainless steel working environment. It has certain wear resistance and corrosion resistance. Suitable for all kinds of precision machinery, bearings, electrical, equipment, instruments, meters, transportation vehicles, household appliances, etc. Mainly used in the manufacture of air, water vapor, water and oxidizing acid corrosion resistant parts.

410S NO.1 Stainless Hot Rolled Sheet is a martensitic stainless steel. The corrosion resistance and formability of 410 steel are improved. For high toughness and impact load parts, such as automobile turbine blades, structural frame, lining, bolts, nuts, etc., can also be used for water vapor, ammonia carbonate and flow oil corrosion lining equipment.

409L NO.1 Stainless Hot Rolled Sheet has strong resistance to corrosion, high temperature and fatigue, which can realize the longevity and lightweight of exhaust system components. Low cost, good flexibility, high material rate, easy to replace, belongs to the environmental protection of the new product, has excellent corrosion resistance, suitable for extending the life of the car and lightweight, and as a recyclable environmental protection material.