X-750 Inconel Plate/Sheet alloy is mainly a nickel-based superalloy with γ"[Ni3(Al, Ti, Nb)] phase aging strengthening. It has good corrosion resistance and oxidation resistance under 980℃, high strength under 800℃, and good relaxation resistance under 540℃. At the same time, it has good forming performance and welding performance. The alloy is mainly used in the manufacture of plane springs and coil springs that work below 800℃ and require high strength and slack resistance. It can also be used to manufacture parts such as turbine blades of steam turbines. We can supply plate, strip, bar, forgings, ring parts, wire and pipe.

625 Inconel Plate/Sheet alloy is a solid solution strengthened nickel-based deformation superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile and fatigue properties from low temperature to 980℃, and is resistant to stress corrosion in salt spray atmosphere. Therefore, it can be widely used in the manufacture of aero engine parts, aerospace structural parts and chemical equipment. The alloy is used to manufacture engine casing, guide blade, mounting edge and barrel, fuel main and other parts, has passed the practical application assessment, the maximum operating temperature of 950℃; The alloy has a certain aging hardening phenomenon after long-term use at 550 ~ 700℃, resulting in some decline in the plasticity of the alloy.

600 Inconel Plate/Sheet inconel steel products can be present in several crystalline forms, the most common of which are body-centered cubic (bcc) and face-centered cubic (fcc). In pure iron, the fcc structure still exists between 910 and 1400 ° C at this time interval below and above the body-centered cubic structure up to 1539 ° C at the melting temperature.

B3 Hastelloy Plate/Sheet alloy has excellent resistance to hydrochloric acid corrosion at any temperature and concentration. It can be used in tubes and containers where hydrochloric acid medium is used. Also suitable for sulfuric acid, acetic acid, formic acid, phosphoric acid and other non-oxidizing media. It has good corrosion resistance and very good thermal stability. B3 alloy has high resistance to puncturing corrosion, stress corrosion cracking, knife corrosion and welding heat affected zone corrosion. Hastelloy is a kind of nickel-based corrosion resistant alloy, which can be divided into two categories: nickel-chromium alloy and nickel-chrome-molybdenum alloy. Hastelloy alloy has good corrosion resistance and thermal stability, and is widely used in aviation and chemical fields.

C-4 Hastelloy Plate/Sheet has good thermal stability, 650-1040 degrees Celsius has good toughness and corrosion resistance. Hastelloy is a kind of nickel-based corrosion resistant alloy, which can be divided into two categories: nickel-chromium alloy and nickel-chrome-molybdenum alloy. Hastelloy alloy has good corrosion resistance and thermal stability, and is widely used in aviation and chemical fields.

C-22 Hastelloy Plate/Sheet has better uniform corrosion resistance than C-4 and C-276 in the oxidation medium, and excellent local corrosion resistance. Hastelloy is a kind of nickel-based corrosion resistant alloy, which can be divided into two categories: nickel-chromium alloy and nickel-chrome-molybdenum alloy. Hastelloy alloy has good corrosion resistance and thermal stability, and is widely used in aviation and chemical fields.

C-276 Hastelloy Plate has good resistance to oxidation and moderate reducing corrosion, excellent stress corrosion resistance. Hastelloy is a kind of nickel-based corrosion resistant alloy, which can be divided into two categories: nickel-chromium alloy and nickel-chrome-molybdenum alloy. Hastelloy alloy has good corrosion resistance and thermal stability, and is widely used in aviation and chemical fields.

GR3 Titanium Rods has good physical and chemical properties, low density, light weight, non-magnetic, high strength, TA3 titanium rod, has good corrosion resistance, it has good mechanical properties and welding performance. Desalination plants, firewalls and explosion-proof walls on offshore platforms, Bridges, structural design components, oil storage tanks, pressure vessels, heat exchangers, water heaters, rotors, impellers and shafts, cutting tools Petroleum, electronics, chemical, pharmaceutical, textile, food, machinery, construction, nuclear power, aerospace, military and other industries.

GR2 Titanium Rods is a non-alloyed, medium strength titanium product, which has the properties of sex, weldability, strength, ductility and formability. Good surface, straightness and roundness due to radial forging. The production methods of titanium and titanium alloy forging rods mainly include air hammer forging, radial forging and hydraulic forging. Air hammer forging is suitable for small and medium-sized titanium and titanium alloy rods, radial forging is suitable for small and medium-sized rods, and hydraulic forging is suitable for large and medium-sized rods. Titanium and titanium alloy bars produced by forging are mainly used in the production of structural parts, fasteners, forgings and die forgings for aerospace, chemical industry, shipbuilding, ship building, medical, sports and other industries.