X-750 Inconel Plate/Sheet alloy is mainly a nickel-based superalloy with γ"[Ni3(Al, Ti, Nb)] phase aging strengthening. It has good corrosion resistance and oxidation resistance under 980℃, high strength under 800℃, and good relaxation resistance under 540℃. At the same time, it has good forming performance and welding performance. The alloy is mainly used in the manufacture of plane springs and coil springs that work below 800℃ and require high strength and slack resistance. It can also be used to manufacture parts such as turbine blades of steam turbines. We can supply plate, strip, bar, forgings, ring parts, wire and pipe.

625 Inconel Plate/Sheet alloy is a solid solution strengthened nickel-based deformation superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile and fatigue properties from low temperature to 980℃, and is resistant to stress corrosion in salt spray atmosphere. Therefore, it can be widely used in the manufacture of aero engine parts, aerospace structural parts and chemical equipment. The alloy is used to manufacture engine casing, guide blade, mounting edge and barrel, fuel main and other parts, has passed the practical application assessment, the maximum operating temperature of 950℃; The alloy has a certain aging hardening phenomenon after long-term use at 550 ~ 700℃, resulting in some decline in the plasticity of the alloy.

600 Inconel Plate/Sheet inconel steel products can be present in several crystalline forms, the most common of which are body-centered cubic (bcc) and face-centered cubic (fcc). In pure iron, the fcc structure still exists between 910 and 1400 ° C at this time interval below and above the body-centered cubic structure up to 1539 ° C at the melting temperature.

B3 Hastelloy Plate/Sheet alloy has excellent resistance to hydrochloric acid corrosion at any temperature and concentration. It can be used in tubes and containers where hydrochloric acid medium is used. Also suitable for sulfuric acid, acetic acid, formic acid, phosphoric acid and other non-oxidizing media. It has good corrosion resistance and very good thermal stability. B3 alloy has high resistance to puncturing corrosion, stress corrosion cracking, knife corrosion and welding heat affected zone corrosion. Hastelloy is a kind of nickel-based corrosion resistant alloy, which can be divided into two categories: nickel-chromium alloy and nickel-chrome-molybdenum alloy. Hastelloy alloy has good corrosion resistance and thermal stability, and is widely used in aviation and chemical fields.

C-4 Hastelloy Plate/Sheet has good thermal stability, 650-1040 degrees Celsius has good toughness and corrosion resistance. Hastelloy is a kind of nickel-based corrosion resistant alloy, which can be divided into two categories: nickel-chromium alloy and nickel-chrome-molybdenum alloy. Hastelloy alloy has good corrosion resistance and thermal stability, and is widely used in aviation and chemical fields.

C-22 Hastelloy Plate/Sheet has better uniform corrosion resistance than C-4 and C-276 in the oxidation medium, and excellent local corrosion resistance. Hastelloy is a kind of nickel-based corrosion resistant alloy, which can be divided into two categories: nickel-chromium alloy and nickel-chrome-molybdenum alloy. Hastelloy alloy has good corrosion resistance and thermal stability, and is widely used in aviation and chemical fields.

C-276 Hastelloy Plate has good resistance to oxidation and moderate reducing corrosion, excellent stress corrosion resistance. Hastelloy is a kind of nickel-based corrosion resistant alloy, which can be divided into two categories: nickel-chromium alloy and nickel-chrome-molybdenum alloy. Hastelloy alloy has good corrosion resistance and thermal stability, and is widely used in aviation and chemical fields.

904L Stainless steel medium thickness plate super austenitic stainless steel is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is designed for harsh corrosion conditions. With high chromium content and sufficient nickel content, the addition of copper makes it have strong acid resistance, especially to chloride gap corrosion and stress corrosion cracking has high resistance, not easy to appear corrosion spots and cracks, pitting corrosion resistance is slightly better than other steel types, with good processability and weldability, can be used in pressure vessels.

444 Stainless steel medium thickness plate，444 (00Cr18Mo2) is an ultra-low carbon nitrogen, containing 18% chromium and 2% molybdenum, high corrosion resistance of ferritic stainless steel. The yield strength of 444 is equivalent to 1.5 times that of carbon steel and 6 times that of FRP. It has outstanding advantages in earthquake resistance, snow resistance, wind pressure resistance and impact resistance. SUS444 ferritic stainless steel has high thermal conductivity, about 130% ~ 150% of chromium-nickel austenitic stainless steel, which is very suitable for heat exchange purposes. The coefficient of thermal expansion is small, and the team is only 60% ~ 70% of the chromium-nickel Olympic stenitic stainless steel, which is very suitable for thermal expansion, cold contraction and thermal circulation. The steel has good plasticity and toughness, and is suitable for drawing, rolling and stamping. In particular, stress corrosion resistance is the most excellent, in high chloride medium corrosion resistance is better than ordinary ferrite stainless steel and austenitic stainless steel, generally do not produce chloride stress corrosion rupture. After the addition of Ti,Mo and other elements, the performance of resistance to pore corrosion and crevice corrosion is improved